If you look at one of the photos at http://www.harryproa.com/building_Vis/building_Vis_12.htm you
can see a top hat shaped ring around the mast. This is bonded to the deck and a
boot is clamped around the mast. The bottom of the boot is drawn in with a cord
around the ring. This allows the boot to rotate with the mast.
----- Original Message -----
Sent: Tuesday, March 14, 2006 5:36
Subject: [harryproa] Mast Bearings
On the material list you show two mast bearings for Hgami. How
make the upper one
<*> To visit your group on the web, go
To unsubscribe from this group, send an email to:
Your use of Yahoo! Groups is subject to:
Internal Virus Database is out-of-date.
Checked by AVG
Version: 7.0.344 / Virus Database: 268.1.2/274 - Release Date:
Yahoo! Groups Links