Subject: [harryproa] Re: epoxy foam |
From: "captian_rapscallion" <captian_rapscallion@yahoo.com> |
Date: 4/21/2008, 8:43 PM |
To: harryproa@yahoogroups.com.au |
Reply-to: harryproa@yahoogroups.com.au |
The even thicknesses question brings the KSS method into play. I have
nida core (like polycore)samples. I believe the nida core doesn't have
the shear strength Core cell does, and this epoxy foam is close to
core cell of equal density. I don't know enough about FEM to calculate
scantlings for multihulls, so I can't say if the final build would be
lighter.
--- In harryproa@yahoogrou
>
> -I am not sure how you go about making even thickness cores with this
> product. ,\
> The weight is twice that of polycore, but that does not include the
> extra resin taken up by the scrim
> Robert-- In harryproa@yahoogrou
> <captian_rapscallio
> >
> >
> > I'll have to look into Microballoons or Q cell. I liked the ash
> > because it was very cheap (.15 a pound) and I saw increases in tensile
> > strength. I think a coupling agent is bonding the ash to the epoxy.
> >
> > http://www.mcmc-
> >
> > As for the weight of the foam, at 170 kg/m^3 the foam seems to perform
> > close to core-cell. I've seen better performance with the ash and
> > short carbon fiber filler. If cost was no object I would probably go
> > for a SAN foam, but this stuff seems to have a pretty good bang for
> > the buck.
> >
> >
> > --- In harryproa@yahoogrou
> > >
> > > G'day,
> > > Where are the properties of the epoxy foam you are referring to?
> > > Microballoons or Q cell will give a lighter end product than the fly
> > > ash.
> > >
> > > regards,
> > >
> > > Rob
> > >
> > > On Sun, Apr 20, 2008 at 6:14 AM, captian_rapscallion
> > > <captian_rapscallio
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > --- In harryproa@yahoogrou
> > > >
> > > > I realize most boatbuilders use vinylester, but it is actually
> > cheaper
> > > > for me to buy epoxy vs. vinylester. I can't get vinylester for
> under
> > > > 50 bucks a gallon, but I can buy epoxy for that.
> > > >
> > > > Take a look at the physical properities on the SC epoxy foam.
Looks
> > > > pretty good compared to core cell.
> > > >
> > > >
> > >
> >
>