Dear people,
As we are writing this, the following things are going on:
- the high-temperature composite wingmastmolds are getting where they
have to be ... other molds are finished
- we are running statical and dynamical simulations on the wingmast,
both spined and unspined (not shear webbed) in order to get the best
construction and layup without spilling expensive carbon ... we will
publish these results as soon as they are available and checked ...
- we are setting up a CFD testing facilities ... for foils and other
stuff
- we are preparing Elementarry (a name remains to be found) production
envisaging the following:
- temperature controlled infusion
- low-cost (E-Glass/PVCFoam/
production
- fully logged production process (products and process details)
- we have extended our facilities with in-house designed and built
computer controlled ovens, one for hulls (8 by 3 meter) and one for
spars (12 by 1 meter)
- we are redesigning and building an interior for a 50 ft motorboat
- we are supervising various home-built projects
- we are rebuilding the Harryproa website as well as our own ...
Both are quite outdated ...
We will keep the yahoo-group informed ...
Best regards,
Myriam & Youri
Wangkaboats Belgium
On Fri, 2008-1-21 at 07:24 +0000, Robert wrote:
> Any news of the European proas progress,
> Robert
>
>
>
>
>
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch format to Traditional
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe