Subject: Re: [harryproa] Re: Trailerable rig questions |
From: Gardner Pomper |
Date: 4/7/2009, 1:46 PM |
To: harryproa@yahoogroups.com.au |
Reply-to: harryproa@yahoogroups.com.au |
Well, with a full roach, I could get > 300 sq ft out of the main, so I
could reduce the jib and get the same sail area, which is probably too
much anyway.
I did leave out one consideration, which is to stay with the easyrig,
but with a custom sail for an 8' foot. I could then leave the lw hull
as it is, and go with a 2 part mast, for a 55' luff and an 8' foot
with an 80% roach for 350 sq ft of main and maybe a 150 sq ft jib.
This is still a 2 part mast and custom sails, so I still don't know
how that would compare in price and ease of trailer with the other
options.
I have requested quotes from sailmakers, but I don't know if I can get
anything reasonable without more specifics on the sails.
- Gardner
On Tue, Apr 7, 2009 at 1:23 PM, jrwells2007 <jrwells2007@
>> I could then go with a 50' luff and 12' foot to get 300 sq ft out of
>> the main, and a 50' luff and 9' foot for 225 sq ft from the jib, and
>
> Not sure about these assumptions. A ratio of main/jib of 300/225 might be
> out of balance with too large a jib.
> Also this appears to have a masthead rig whereas most Easyrigs seem to be
> about 3/4 rigs.
>
>