Subject: [harryproa] Re: Can you cut a carbon mast in half, then repair it?
From: "proadude" <rbmaui@yahoo.com>
Date: 4/29/2009, 11:18 AM
To: harryproa@yahoogroups.com.au
Reply-to:
harryproa@yahoogroups.com.au



I kind of understand the concept of the telescoping mast,but the practices is what makes me worry.You have to have a halyard lock(?),than any bending of the mast(or those 2 pieces) will make a friction??...it can be difficult in the strong breeze to actually lower the upper must??...what do you think?

--- In harryproa@yahoogroups.com.au, Rob Denney <harryproa@...> wrote:
>
> Still a theory, but there are 3 owners considering using them.
>
>
>
> On Wed, Apr 29, 2009 at 10:46 PM, proadude <rbmaui@...> wrote:
>
> >
> >
> > Rob,so what is the progress on the telescoping masts,was there any build
> > yet?...or is it still just a theory?
> > Regards
> >
> >
> > --- In harryproa@yahoogroups.com.au <harryproa%40yahoogroups.com.au>, Rob
> > Denney <harryproa@> wrote:
> > >
> > > G'day,
> > >
> > > Definitely doable. Not sure which wil be the first boat to use it, but
> > > there are 3 thinking seriously about it.
> > >
> > > Gardner. Built it in one piece and if you ever shipo the boat, cut it in
> > > two and rejoin it using the same laminate as the mast on the outside of
> > the
> > > join with a n overlap of at least 100 times the mast wall thickness plus
> > > tapering the laminate. Not optimal, and may mess a little with the bend
> > > characteristics, but won't break.
> > >
> > > Certainly try the other rigs, it would be good to see how they worked and
> > > costed compared to the standard rig.
> > >
> > > regards,
> > >
> > > Rob
> > >
> > > On Wed, Apr 29, 2009 at 8:55 PM, proadude <rbmaui@> wrote:
> > >
> > > >
> > > >
> > > > Hi All,I was away for a while...a long while,but I just got back and in
> > to
> > > > a very interesting subject-a two part mast!?...or,what Rob was talking
> > about
> > > > before,the telescoping mast!!I wonder what has happened to this
> > idea,and I
> > > > do think that this is the answer for the future free standing mast for
> > the
> > > > proa,and not only proa boats...so,what is the progress in this area
> > Rob?Is
> > > > it "doable?
> > > > Regards
> > > >
> > > >
> > > > --- In harryproa@yahoogroups.com.au <harryproa%40yahoogroups.com.au><harryproa%
> > 40yahoogroups.com.au>, Mike
> >
> > > > Crawford <jmichael@> wrote:
> > > > >
> > > > >
> > > > > A two-pat mast seems to be the best bet.
> > > > >
> > > > > A telescoping mast would also be a great fit, but that's a more
> > > > > complex design, and you would lost anti-turtle flotation in one half
> > the
> > > > > mast. I do believe that a telescoping mast could be done, but I also
> > > > > wouldn't want to be one of the early adopters.
> > > > >
> > > > > Robert's idea of a gunter would certainly work. However, I'd
> > > > > personally rather have a rig that makes it easy to raise and stow the
> > > > > sails in any wind, either with roller-reefing or using slides/cars
> > and
> > > > > lazy jacks. It would probably be more time-consuming to go from sail
> > > > > cover to gunter and back again, especially if single-handed.
> > > > >
> > > > > I'd have a pro design a two-part mast, though. There is some serious
> > > > > stress in an unstayed rig, and while it's easy to design for, it does
> > > > > have to be designed for. A joint introduces other stresses, so I'd
> > want
> > > > > it designed by a professional who has access to good Finite Element
> > > > > Analysis software.
> > > > >
> > > > > Cutting a mast and rejoining it could be done, but it probably
> > > > > wouldn't be pretty, and more importantly, you'd lose the ability to
> > pass
> > > > > stress through nice, long, continuous carbon fibers. That said, if
> > the
> > > > > patch were thick enough and long enough, it could work. I'd still
> > want
> > > > > someone to do FEA, though, to make sure how long and thick the patch
> > > > > would have to be.
> > > > >
> > > > > - Mike
> > > > > / /
> > > > >
> > > > > Gardner Pomper wrote:
> > > > > >
> > > > > >
> > > > > > Hi,
> > > > > >
> > > > > > Still trying to figure a good rig for a boat that wants alot of
> > sail
> > > > > > area (Rare Bird-ish), but can still be shipping in a container. The
> > 2
> > > > > > part masts sound doable, but difficult. I was wondering if it makes
> > > > > > sense to just build a regular 1 part mast, 50-60 feet long, then
> > cut
> > > > > > it in half, if I do end up shipping the boat in a container. It
> > will
> > > > > > cost at least $6000 to ship the boat, so I can't imagine doing it
> > more
> > > > > > than 2-3 times in my life (who knows, maybe I never will). Does it
> > > > > > make sense to just cut the mast, stick it in the container and then
> > > > > > repair it at the destination?
> > > > > >
> > > > > > Thanks,
> > > > > > - Gardner
> > > > > >
> > > > > >
> > > > >
> > > >
> > > >
> > > >
> > >
> >
> >
> >
>

__._,_.___
Recent Activity
Visit Your Group
Yahoo!7 360°

Start a blog

Public or private-

it's your choice.

Y!7 Toolbar

Get it Free!

easy 1-click access

to your groups.

Yahoo!7 Groups

Start a group

in 3 easy steps.

Connect with others.

.

__,_._,___