Dennis:
Thanks for the details.
So basically the rudder is made of layers of plywood reinforced with tow and epoxy
down the middle on both sides?
Toni
barcelona
De:
harryproa@yahoogroups.com.au [mailto:harryproa@yahoogroups.com.au] En nombre de Dennis Cox
Enviado el: jueves, 26 de agosto
de 2010 19:31
Para: harryproa@yahoogroups.com.au
Asunto: Re: [harryproa] Rudder
progress...
Hey Toni,
I'll be glad to...
My status... a lot less than I thought I'd be... mainly
because I can't seem to find much time lately. I have just shy of 30
hours into it. I have the lee hull partially assembled. It
has the bottom and sides attached with stringers in the corners. I've
also attached the fiberglass strands for the pick-up points of the diagonal
beams. I have the blanks for the rudders completed and one has been
filament wound.
Design brief of the rudders. Once my first one cures,
I'll be stress testing it. You might want to wait for those results
before using any of this. Some of this is me experimenting. The
proof will be in the test.