Subject: Re: {Disarmed} Re: [harryproa] Epoxy Usage
From: "Henny van Oortmarssen" <henny@fram.nl>
Date: 9/5/2010, 6:12 AM
To:
Reply-to:
harryproa@yahoogroups.com.au

 

http://www.fram.nl/workshop/mainhull/album/Portsidecarbonanchorsandbeambulkheads/photos/photo1.html is a photo for the receipt to make a simple oven. This one is made of standard sieze (60x120cm) polyurethaan insulation amterial (thickness I think 7 cm), so for a box oven you need 5 sheets. Heat by two light bulbs and a plate above to spread the heat (together with some bricks) Started with one 150W halogeen bulb, wow, 250C much too much, then 2x75W light bulbs resulted in 85-90C, 2x40W bulbs became 60-70C and 2x60W bulbs about 70-80C (roomtemp. about 20C)
 
At first I started in the admirals's oven
http://www.fram.nl/workshop/mainhull/album/Bulkheadsandfoldingsystemsetup/photos/photo15.html
now we all know that one need a very understanding wife when undertaking a serious boatbuilding project, but one can go too far ....
so, not a good idea and the DIY oven with the light bulbs is much easier.
 
Henny van Oortmarssen
www.fram.nl
 

__._,_.___
Recent Activity:
Visit Your Group
.

__,_._,___