Yes, we are going to visit IMM 2011 at Stockholm. New things for this
summer are an autopilot (tiller SPX-5) and decoration stripes on the lee
side. I was also planning a gennaker, but the autopilot was more
important.
http://www.imm2011.com/
regards,
Arttu
> Do you plan any trips this summer?
>
> --- On Wed, 4/5/11, arttuheinonen@heinoset.net
<arttuheinonen@heinoset.net> wrote:
>
> From: arttuheinonen@heinoset.net <arttuheinonen@heinoset.net>
> Subject: Re: [harryproa] Motoring HP's
> To: harryproa@yahoogroups.com.au
> Date: Wednesday, 4 May, 2011, 20:16
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> Hi Doug,
>
>
>
> Waves are not a problem at all, only some slam and bang, neither
reversing is a problem. The sleds are hollow and quite firmly hinged to
bridgedeck structures. All this amplifies vibration sounds. Bridgedeck
is made of foam-glass carbon composite. Imagine a car without any noise
insulation.
>
> Regards,
>
>
>
> Arttu
>
>
>
> Doug Haines [doha720@yahoo.co.uk] kirjoitti:
>
> > Arttu
>
> > Thanks for that feedback, but how about if a wave comes up to slap
on the front bit? Is the weight of engine enough to keep the whole lot
down in position?
>
> > If you have''t used it in the choppy weather then it may not have
been possible to observe what happens.
>
> > What is noisy?
>
> >
>
> > Doug
>
> > Mandurah
>
> > Western Australia
>
> >
>
> > --- On Tue, 3/5/11, arttuheinonen@heinoset.net
<arttuheinonen@heinoset.net> wrote:
>
> >
>
> > From: arttuheinonen@heinoset.net <arttuheinonen@heinoset.net>
>
> > Subject: Re: [harryproa] Motoring HP's
>
> > To: harryproa@yahoogroups.com.au
>
> > Date: Tuesday, 3 May, 2011, 6:32
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> > Doug Haines [doha720@yahoo.co.uk] kirjoitti:
>
> >
>
> > > Could someone give feedback on the drop down "sled"?How does that
handle the wave motion?Is there just a pull up pair of ropes - so the
motor is really floating on the top ?How about spry deflection, and
other stuff?Bain, Colin Rudolf, and Attu? Doug
>
> >
>
> > >
>
> >
>
> > > --- On Mon, 2/5/11, tsstproa <bitme1234@yahoo.com> wrote:
>
> >
>
> > > Hi,
>
> >
>
> >
>
> >
>
> > Havent tried that. Our sleds are hanging, not floating. They work
fine , but are noisy. I am now improving spray deflection by deepening
the V-section on the bottom of the sleds
>
> >
>
> > Arttu
>
> >
>
> >
>
> >
>
> > > From: tsstproa <bitme1234@yahoo.com>
>
> >
>
> > > Subject: [harryproa] Windward hull attachment ?
>
> >
>
> > > To: harryproa@yahoogroups.com.au
>
> >
>
> > > Date: Monday, 2 May, 2011, 6:47
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> > > How to attach windward hull and make it bomb proof. Not literally
of course;) Just indestructible to forces at yalp in the most extreme
conditions. I was thinking the attachment needed to be near bulk head to
disperse load more evenly through out hull skin so as not to just rip
out hull. Use maeb as mold and ssalg mold to klub head and surrdouing
lluh niks or is there a better-easier way? Flat 15'' bottom on 22'' wide
sheer, 12' hull to windward.
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> > > Todd
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>