Thanks for the answer. In one aspect I disagree. I would place the radar/plotter screen on the side of the toy box between the winches. Reason for this is that in the dark or when sailing in choppy conditions I prefer not to look at the plotter more than really quickly once in a while. Two reasons for this are 1) the light of the plotter reduces night vision and 2) looking at the plotter in choppy seas makes me sea sick. So location where I can reach the plotter when needed but don't have to look at it when I steer the boat would be optimal. Other locations that do the same can be found and of course it is a matter of preference.
Arto
From: "Rob Denney harryproa@gmail.com [harryproa]" <harryproa@yahoogroups.com.au>
To: harryproa@yahoogroups.com.au
Sent: Friday, April 10, 2015 2:29 PM
Subject: Re: [harryproa] Cruiser 60 questions
This is the sort of comments we need. Please keep them coming.
There is space around the three sides of the bunk which could be made into shelves, shelves on the beam bulkhead, a locker above the beam and space under the steps. If more is required, a hatch could be made in the beam bulkhead to access the space beyond it and the space under the saloon and the outside seats is also accessible from the bunks. Maybe not ideal for the well dressed liveaboard, but the sacrifice required for two bathrooms.
Compass on the steering support (not shown n the drawings). The instruments can go on the cabin roof, above the windows or jumbo displays on or near the masts. VHF just inside the door on the ceiling, radar screen on the opposite side (lots of fog in Peru), both on swinging brackets . Binos and other essential bits either under the seat by the door or in a box beside, on or in the toy box. One of the tables will be the nav table for paper charts, but most of the navigation will be done on a laptop or tablet, connected to a big screen, location yet to be decided, but possibly above one of the tables on a hinge and swivel.
At the moment, the space under the tables is for fridge and freezer.