Subject: Re: [harryproa] Materials supplies?
From: "Mateo mateo002@yahoo.ca [harryproa]" <harryproa@yahoogroups.com.au>
Date: 5/15/2016, 10:43 AM
To: harryproa@yahoogroups.com.au
Reply-to:
harryproa@yahoogroups.com.au

 

Hola Gardner,

Sorry for the delay... here were my Diab foam prices in 2013:

H80 25mm Plain Sheets 2440 x 1220  - 12 sheets/carton - $139-36 / sheet
H80 15mm Plain Sheets 2440 x 1220  - 20 sheets/carton - $  93.62 / sheet
H80 10mm Plain Sheets 2440 x 1220  - 30 sheets/carton - $  62.96 / sheet

Diab will split cartons for a fee. The lead time is 2 weeks. We ordered through:

Eileen Donegan
North South Marine Consolidators LLC/USA
edon55(at)hotmail.com
  PH#  732-766-1832   EMAIL:NSMCLLC(at)HOTMAIL.COM

Carbon Fibre was sourced from Zoltek. You probably need to have a company setup to deal with them B2B.
The price for the UD300 material was $14.90 per pound and available in 12” and 24” wide rolls. They also have tow.

Zoltek Corporation,
3101 McKelvey Rd., St. Louis, MO 63044
Tel 314-291-5110     Fax 314-291-8536
Visit our website at www.zoltek.com
Send inquires for product and pricing to sales@zoltek.com

For my tender I'm currently looking at using TuffStuff made from basalt fibre and Innegra but haven't contacted a vendor yet for pricing. Innegra vendor names include sigmatex,  teamtextiles, textum. TuffStuff is used to make lightweight canoes in Canada.

I sourced fibre-glass from one of Rob's contacts in Australia:

Rudi Steinbusch
Ph: +61 7 3255 6924
Web: www.lavender-ce.com
Email: rsteinbusch@lavender-ce.com


Saludos,
Mateo

On May 14, 2016, at 2:34 PM, "Gardner Pomper gardner@networknow.org [harryproa]" <harryproa@yahoogroups.com.au> wrote:
 

I am going to try building one of Rob's tenders this summer, and I figure it isn't fair to address every question to Rob, because that will probably overwhelm his internet connection (I don't know squat about boat building). I have a vacuum pump and have done a few test pieces, with no real problem except that I have a horrible time with leaks.

I was hoping that people could suggest some other resources for me to read to find information on the specifics of materials to get here in the US. For example, where is a good place to get carbon tow? Any particular vendors, especially on the east coast, with good prices on foam (which seems to be about 50% of the total price!) ?

Thanks all!

- Gardner

__._,_.___

Posted by: Mateo <mateo002@yahoo.ca>
Reply via web post Reply to sender Reply to group Start a new topic Messages in this topic (2)

.

__,_._,___