The 15m/50' lee hull is complete, incl mast bearings and removable ends, painted and Coppercoated.  There is a dent in the polystyrene foam on one end which will need fixing (inject expanding closed cell foam).  The 1.5m/5' end sections are bolted on and can be removed for containerisation or trucking.  Weighs less than 200/440 lbs kgs.

The 6m/20' windward hull is complete, incl windows and hatches, painted and Coppercoated, although the floor needs some stiffening/bulkheads. Weighs ~120 kgs/264 lbs

The 7.5m/25' carbon beams are complete and fitted but not painted.  Weigh approx 25 kgs/55 lbs each.

The rudders are complete, but don't have tillers or extensions.

The rudder mountings are built, but need finishing.

All components were infused, to a high quality apart from the rudder mountings which were hand wrapped.  

A mast will cost ~$AUS10,000/$US7,500 if built by Etamax, ~$Aus2,000/$US1,500 for a home build, sail ~$Aus5,000/$US3,700.  Plus tramp, running rigging, etc.  I will provide whatever support (plans, information, material sources, etc) is required to complete the boat.

The boat is at Coomera on the Gold Coast.  It will fit in a 12m container. Greight to most major ports is about $Aus5,000.    All offers considered.

Any questions, let me know.

regards,

rob