The feedback we get is an important part of the design process. Please keep it coming.
Lee hull beam at bunk height (500mm/20" off the floor) is 750mm/30".
Access is a little easier when alongside due to the flat foredecks. Recessed steps could (would, we will add them to the plans) be included in the hull sides to make it easier from a low jetty.
End on/Med mooring is via a gangplank which stores alongside the beam and sits on a pin in the foredeck. It has folding stanchions and a handrail. It is also very handy as a means of getting onto the boat from the water.
The seat as drawn can be moved across to sit at the table. The options for it and the space around it are open to whatever a praticular owner wants. The ease of infusing funrniture and installing it on a flat floor, against vertical walls makes customisation simple.
eruttan,
Ta, Will fix it.
Pictures of the Bucket List foiling lee hulls and beam are on https://www.facebook.com/Harryproa/?ref=page_internal
On Tue, Nov 21, 2017 at 6:31 PM, Arto Hakkarainen ahakkara@yahoo.com [harryproa] <harryproa@yahoogroups.com.au> wrote:
Looks good! Seems that you have read carefully the earlier comments and proposals. I like the new salon layout. Couple of questions:What is the inside beam of the lee hull at bunks?Any developments on access to dock? Or in general entering and leaving the boat when not anchored and alongside mooring is not available?RegardsArto
From: "Rob Denney harryproa@gmail.com [harryproa]" <harryproa@yahoogroups.com.au>
To: harryproa@yahoogroups.com.au
Sent: Tuesday, November 21, 2017 6:00 AM
Subject: [harryproa] C50
The latest version of the C50 is now on the web page. http://harryproa.com/?p=1749#more-1749 Based on Visionarry, but lighter, easier to build, cheaper, better looking, with more sail area and a much more user friendly layout.Look forward to comments, suggestions, etc
__._,_.___
Posted by: Rob Denney <harryproa@gmail.com>
| Reply via web post | • | Reply to sender | • | Reply to group | • | Start a new topic | • | Messages in this topic (5) |
.