Viscosity 300 vs 200. Look at Darcy's law and you will understand the influence of the resin viscosity vs your infusion strategy.
Q = volume rate of flow
K = permeability of the material
A = area of the cross section through which the resin is flowing
Δp = pressure difference across a section of laminate whose length is L
µ = viscosity of the resin
L = distance the resin has to travel
Q = K A Δp
µ L
Where:Q = volume rate of flow
K = permeability of the material
A = area of the cross section through which the resin is flowing
Δp = pressure difference across a section of laminate whose length is L
µ = viscosity of the resin
L = distance the resin has to travel
6hrs vs 8hrs.
6 hrs looks fine to me. It happened to be that my resin has 8 hours (at 20C)
Op 24 aug. 2018 om 16:33 heeft '.' eruttan@yahoo.com [harryproa] <harryproa@yahoogroups.com.au> het volgende geschreven:
Are you able to speak to how does 300 cps compare to 200?
Or how does 6 hours compare to 8
__._,_.___
Posted by: Fram <henny@fram.nl>
| Reply via web post | • | Reply to sender | • | Reply to group | • | Start a new topic | • | Messages in this topic (27) |
SPONSORED LINKS
.