Did someone sneak a disassembled pic onto the Ex40 page?

| The T40 is 4.7m/15'5" long x 1.8m/5'10" wide. As drawn, the boat would telescope to 4.35m/14'3". The tender would sit under the telescoped bridge deck clear of the water is it was 500mm/20" deep.

And MFW! there is a telescoping drawing? Where would one find this? I know there is a todo list, but just attach it to the message you big tease. 14'3"?

| Access to the motor would require a hatch in the cockpit floor.

When collapsed? That's gonna be a head down bitch, right? Or is the hatch big enough to climb down and sit in the tender?

| Assuming it was wet up correctly, a single line would winch the boat in and out, with the tender locked in place. It could then be lifted lowered as required. Or, the boat could be telescoped with the stern down, even while motoring.

Ha, hows having dreams come true feel Mike?

| The above assumes internal (ww inside lw) telescoping which will mean some changes to the deck layout. Over/under telescoping would require a major redraw, resulting in a somewhat different boat, I think.

And you got the sexyier beams too Mike.

| I'm not sure of this answers all the questions asked as the post has disappeared from my email and is not on the Groups page. Please ask again if I have missed anything.

Missing message is here https://au.groups.yahoo.com/neo/groups/harryproa/conversations/messages/13886

Everything answered I think. 20" beam clearance was the number right?
Dies that seem low?

| The Chat group move is also on the top of the 'to do' list. ;-)

Looking forward to it.